Malleable iron reducing tee (130R) ASTM

Caractéristiques:

Certificat : Approuvé FM / Listé UL

Size: 3/8” – 6” (DN 10 – DN 150)

Pression : classe 150 / classe 300

Dimensions : ANSI B16.3

Matériau : Fonte malléable ASTM A197

Fileté : NPT ASME B1.20.1

Surface : Noir / Galvanisé électriquement / Galvanisé à chaud

Discuter maintenant

Détails du produit

Malleable iron reducing tee (130R) is with three ends female threads and used to connect the pipes with male thread. Used to change the direction of the fluid, used at the branch pipe of the main pipeline.

Classe 150 Type

TAILLE		Un (MM)	B (MM)
3/8”X1/4”	DN10XDN8	22.4	22.9
1/2”X1/8”	DN15XDN6	22	23
1/2”X1/4”	DN15XDN8	24.6	24.9
1/2”X3/8”	DN15XDN10	26.4	26.2
3/4”X1/4”	DN20XDN8	26.7	27.4
3/4”X3/8”	DN20XDN10	28.5	28.7
3/4”X1/2”	DN20XDN15	30.5	31
1”X1/4”	DN25XDN8	28.2	31
1”X3/8”	DN25XDN10	30	32.3
1”X1/2”	DN25XDN15	32	35.5
1”X3/4”	DN25XDN20	34.8	36.8
1-1/4”X1/8”	DN32XDN6
1-1/4”X3/8”	DN32XDN10	32	36.6
1-1/4”X1/2”	DN32XDN15	34	38.9
1-1/4”X3/4”	DN32XDN20	36.8	41.2
1-1/4”X1”	DN32XDN25	40.1	42.4
1-1/2”X3/8”	DN40XDN10	34	39
1-1/2”X1/2”	DN40XDN15	35.8	42.2
1-1/2”X3/4”	DN40XDN20	38.6	44.5
1-1/2”X1”	DN40XDN25	41.9	45.7
1-1/2”X1-1/4”	DN40XDN32	46.2	47.8
2”X3/8”	DN50XDN10	36	46
2”X1/2”	DN50XDN15	37.9	47.8
2”X3/4”	DN50XDN20	40.6	50
2”X1”	DN50XDN25	43.9	51.3
2”X1-1/4”	DN50XDN32	48.3	53.3
2”X1-1/2”	DN50XDN40	51.3	54.9
2/1/2”X1/2”	DN65XDN15	37.9	47.8
2-1/2”X3/4”	DN65XDN20	44.2	58.9
2-1/2”X1”	DN65XDN25	47.5	60.2
2-1/2”X1-1/4”	DN65XDN32	51.8	62.2
2-1/2”X1-1/2”	DN65XDN40	54.9	63.8
2-1/2”X2”	DN65XDN50	60.7	66
3”X1/2”	DN80XDN15	42	64
3”X3/4”	DN80XDN20	47.5	66.3
3”X1”	DN80XDN25	50.8	67.6
3”X1-1/4”	DN80XDN32	55.1	69.6
3”X1-1/2”	DN80XDN40	58.2	71.1
3”X2”	DN80XDN50	64	73.4
3”X2-1/2”	DN80XDN65	71.9	76
4”X1/2”	DN100XDN15	50	79
4”X3/4”	DN100XDN20	53	79
4”X1”	DN100XDN25	56	82
4”X1-1/4”	DN100XDN32	60	84
4”X1-1/2”	DN100XDN40	63.8	84.3
4”X2”	DN100XDN50	69.6	86.6
4”X2-1/2”	DN100XDN65	77.5	89.2
4”X3”	DN100XDN80	83.8	91.4
6”X2”	DN150XDN50	78.2	115.8
6”X3”	DN150XDN80	92.5	120.7
6”X4”	DN150XDN100	104.9	125.5

Classe 300 Type

TAILLE		Un (MM)	B (MM)	C (MM)
1/2”X3/8”	DN15XDN10	30.2	30.2	30.2
3/4”X1/2”	DN20XDN15	33.3	33.3	35.1
1”X1/2”	DN25XDN15	36.6	36.6	38.1
1”X3/4”	DN25XDN20	38.1	38.1	39.6
1-1/4”X1/2”	DN32XDN15	38.1	38.1	42.9
1-1/4”X3/4”	DN32XDN20	41.4	41.4	44.5
1-1/4”X1”	DN32XDN25	44.5	44.5	46
1-1/2”X1/2”	DN40XDN15	41.4	41.4	46
1-1/2”X3/4”	DN40XDN20	42.9	42.9	47.6
1-1/2”X1”	DN40XDN25	46	46	50.8
1-1/2”X1-1/4”	DN40XDN32	50.8	50.8	52.3
2”X1/2”	DN50XDN15	44.5	52.3	52.3
2”X3/4”	DN50XDN20	46	46	54.1
2”X1”	DN50XDN25	50.8	50.8	57.2
2”X1-1/4”	DN50XDN32	54.1	54.1	58.7
2”X1-1/2”	DN50XDN40	57.2	57.2	60.5
2-1/2”X2”	DN65XDN50	68.3	68.3	70
3”x2”	DN80XDN50	71.4	71.4	79.5
4”X2-1/2”	DN100XDN65	94	94	101.5
4”X3”	DN100XDN80	101.5	101.5	108